Filter
Top Products
S
TEP
1: A
SSEMBLE
THE
S
CANNER
5
Installation
Installation is a quick, four-step process:
1. Assemble the scanner
2. Connect and power on the scanner
3. Install the software
4. Connect the USB cable to your computer
S
TEP
1: A
SSEMBLE
THE
S
CANNER
To assemble the scanner:
1. Remove all shipping tape from the top and bottom of the scanner.
2. Align the slots on the paper guide with the ridges on the scanner
and slide it down until it snaps into place.
Warning
: Do not plug in the USB cable until after you have installed
the software. Complete the installation steps in the order described in
the installation procedure below.