Filter
Top Products
Page 4.26
Blue Only
This is useful for color-calibrating the projector or other video components.
Use the
and keys to select from:
On only the blue signal is displayed - green and red are turned off
Off all three signals - red, green and blue - are displayed
Test Patterns
Use the
and keys to select from:
Test Pattern Off
White
Black
Red
Green
Blue
Cyan
Magenta
Yellow
Chequerboard
Greyscale
Alignment grid
To turn the test pattern Off, press any other key.
Altitude
For use at high altitudes where the air is thinner, the fan speed can be increased.
Use the
and keys to select from:
Low normal speed fan
High high speed fan
Ɣ
1.
2.
Ɣ
Notes
To exit from the menus
completely, you may need to
press
up to three times.
Image changes made using
the menus will take effect
immediately.
Some menu items may be
greyed out - unavailable due to
the effect of settings made in
other menus, or due to the type
of input signal.
If the projector frequently
overheats when used in a high
altitude environment, then
it may help to use the High
Altitude setting.
In most cases, the Low Altitude
setting should be satisfactory.
Service menu continued