Vivitek D8300 Series Projector User Manual


 
Page 6.14
Code transmitted <keyname> Description
0x82 sharp
Bring up or cancel sharpness slide bar.
0x83 nr
Bring up or cancel noise reduction slide bar.
0x85 gam.sw
Switch to the next gamma value.
0x8B src.1 Switch the active source to source 1.
0x8C src.2
Switch the active source to source 2.
0x8D src.3
Switch the active source to source 3.
0x8E src.4
Switch the active source to source 4.
0x8F src.5
Switch the active source to source 5.
0x93 osc.sw
Switch to the next Overscan mode.
0x98 mem.1
Recall user memory associated with the User Memory A key.
0x99 mem.2
Recall user memory associated with the User Memory B key.
0x9A mem.3 Recall user memory associated with the User Memory C key.
0x9D asp.sw
Switch to the next aspect ratio setting.
0xA3 bcolor.sw
Switch Brilliant Color on or off.
0xAA ctemp.sw
Switch to the next colour temperature value.
0xAD pattern.sw Switch to the next test pattern.