Vivotek ND4801 Network Router User Manual


 
VIVOTEK
106 - User's Manual
How to Manually Begin /Stop Recording
By default, all devices are assigned to the default recording storage and default recording
schedule. Therefore, once you included a camera into the NVR's conguration, the VAST Server
will begin to record live video according to the default recording schedule. Please refer to How
to Edit Recording Schedules on page 88.
However, if you have changed the default schedule, you can manually click Manually Begin
Recording to enable a device without setting up a recording schedule. Please follow the
instructions below to manually begin recording.
Select the device from the hierarchical device tree under the Default Group, then click Edit >
Manually Begin Recording on the menu bar (or right-click the device and select Manually
Begin Recording). The text on the menu bar will turn into Manually Stop Recording as shown
below and the VAST Server will start to record video from the target camera. Please note that
its priority will be higher than the recording schedule, and the recording task will continue unless
you click on Manually Stop Recording. After you click Manually Stop Recording, the device
will then follow the preset recording schedule.