VIVOTEK
14 - User's Manual
Network Deployment
1.
Connect network cameras to the NVR’s LAN ports.
2. If you want to access NVR over the Internet, connect the NVR to the Internet via the WAN
port. A web console can be established from a remote PC by keying http://<public IP>:3454 in
a browser’s URL address eld. However, port forwarding on the router for the TCP port will be
necessary.
3. Flip the power switch (at the rear of chassis) to the ON position, and push the power button
to run the NVR.
0
1
Router
Internet
Router
Default Fixed IP:
192.168.1.10
LAN WAN
Switch
Router / Wireless AP
Clients
The LAN and WAN ports can be congured into the same or different subnets.
If you have cameras connected via the WAN port, make sure the WAN port acquires an IP
address from a DHCP server on router or AP. If not, the cameras detected through the WAN port
will use the default IPs, e.g., 169.254.xx.xx, and the LiveClient software will not be able to detect
their presence.
NOTE:
Default: DHCP