VIVOTEK
74 - User's Manual
e. The Device List window will prompt. Select one or more
devices and set the Notification Type. Depending on the
trigger source, the Notication Type will be different. Then
click OK to close the window.
f. The trigger source(s) will be listed on the window as shown
below. If you want to add more Trigger sources, click
Add and repeat steps d.and e. Then click Next to assign
action(s) to the trigger source(s).
g. Click Add to open the Action Settings window.
There are several options with the Action Settings.
Email: The sever will send a notication via e-mail when a trigger is activated.
h. To enable this function, please set up the SMTP server first. Click SMTP Setting to open the
window and refer to page 111 for detailed information.
i. Enter the related informtaion. You can modify the mail content in the blank. If you want to modify the
content, click Insert Macro to select the parameter. When completed, click OK on the bottom to
enable the setting.
f
g
h
i