Filter
Top Products
VIVOTEK
User's Manual - 23
Chapter Two NVR LiveClient Configuration
Centralized management site for all the logged in clients
An NVR can also be managed using a separately-installed LiveClient on a remote PC (rev.
1.7.x or later).
Local 1080P HD display
Up to 16 video recording channels
Store recorded data onto a total of four hard disks (single disks, RAID0, RAID1, RAID5, or
RAID10 configurations)
Live video for the local/remote LiveClient users
Retrieval of recorded video for the local/remote Playback users
LiveClient is the management interface to your NVR server. The server-related settings
are made via the VAST LiveClient utility. The convenient and intuitive user interface on the
LiveClient helps managing cameras, live monitoring, and recording congurations.
• Only users with the Administrator's privileges can manage the LiveClient/s various function
groups.
• The maximum length of recording will depend on the video recording settings, the number of
cameras, and Storage Group settings.
Below are the approximate numbers for a recording task. A Constant Bit Rate method (xed
bit rate per second) is recommended to control the bandwidth and total le size consumed
with continuous recording.
If the max. bit rate for each camera is set to 6Mbps at the 1080P resolution (in H.264), each
recording channel requires 6Mb x 86400 / 8 = 63.3GB each day as storage space. With 16
recording channels, a 1,518GB of storage space is required for continuous recording for one
day.
A RAID0 volume consisting of 4x 2TB disk drives can hold the 16 HD streaming recording for
5 days.
Information:
i