Filter
Top Products
VIVOTEK
108 - User's Manual
Setup Backup Schedule
f. Fill in a desired time and click >> to add the backup time. Please note that the backup time interval
must not be shorter than 1 hour. For example, 23:40 and 00:15 are not allowed to exist simultaneously.
In the sample below, the server will backup the recorded data at 12:00 PM and 23:00 PM everyday
once you save the settings.
The following diagram shows the backup schedule and backup data:
Select Backup Target
g. Click Browse... to select a path (local path or network storage) to store the backup data. Please
note that the disk for backup data should be different from the original recording path, or a warning
message will pop up as shown below. For more information about how to set up recording path, please
refer to page 84. Note that you should
not select disk C:\ or D:\ as the backup
target. C:\ and D:\ are for system
programs and database.
h. Select a maximum size for backup folder. The server will divide backup data into the following size:
VCD (650M), DVD (4.7G), Customize, or Unlimited size according to your choice.
i. Select Delete old backups if space is insufcient if you want to do cylic backup due to the limited
size of the hard disk.
Other Options
j. If you only want to backup the recorded data of events, select Backup only events and ll in the pre-
and post-event time.
Server
start
12:00
2010/01/24
23:00
2010/01/24
12:00
2010/01/25
23:00
2010/01/25
2nd backup
data
1st backup
data
3rd backup
data
4nd backup
data
f
g
h
i
j
NOTE: