Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
1-6
BEFORE MAKING COPIES
The following information is shown on the touch panel:
Copier status, operational instructions, cautionary messages, reproduction ratios, total copy quantity,
paper type and colour modes.
1. DESCRIPTION OF THE DIGITAL COLOUR COPIER AND THE OPTIONAL EQUIPMENT (Cont.)
Touch Panel
Function setting area
Total copy
quantity
Reproduction ratio
Message
Index keys
Message Display
When the power is turned on, the following basic screen is shown on the touch panel. (If each department is
controlled by an access code, a different screen is displayed. Page 1-9)
On the screen, currently set functions, selected functions and the copier status are shown using mes-
sages and illustrations.
* The contents of the touch panel screens in this manual show a copier equipped with a complete range of
options.
Set functions confirmation key
Selected colour mode
Paper type
Touch-keys
- Index keys
Used for switching between the Basic, Colour, Editing and Programme menu.
- Function setting area
This is where you select or set various functions.
The various function items are touch-key selectable. Press any key lightly with your finger.
- Paper type
If THIN, THICK1 paper or OHP films are set in the cassette
( Page 2-7), or any special sheets are set on the sheet
bypass (
Page 6-10), the selected paper type is displayed
on the top right of the screen.
THIN
OHP
FILM
THICK1,2,3