Wacom DTZ-1200W Graphics Tablet User Manual


 
Appendix
Page 60
DISPLAY
Display a-Si active matrix TFT LCD (IPS type)
Screen size 12.1 inch (261.1 x 163.2 mm (10.3 x 6.4 in))
Aspect ratio 16 : 10
Input video connector DVI-I (29 pin)
Input video signal Digital: DVI 1.0 compliance / analog RGB
Output video connector No video output
Output video signal No video output
Supported resolutions 1280 x 800 pixels, 1024 x 768, 800 x 600, 640 x 480 pixels
White luminance uniformity 70%, typical
Pixel pitch 0.204 (H) x 0.204 (V) mm (0.01 x 0.01 in)
Viewing angles @ CR10:1
(horizontal/vertical)
170(85/85) / 170(85/85), typical
Display colors 16.7 million colors
Pixels 1280 x 800
Response time (Tr + Tf) 25 ms (typ.)
Luminance 180 cd/m2 (typ.)
Contrast ratio 600:1 (typ.)
OSD manual control Brightness, Contrast, Clock, Phase, Vertical position,
Horizontal position, Transparency, Time Out, Auto-Adjust,
Language, Backlight, Menu Position, Scaling,
Color temperature (9300K/6500K/CUSTOM/DIRECT), Reset
Plug and Play DDC 2B, DDC/CI
LCD quality Each LCD panel is produced under very stringent quality standards.
Production techniques cannot guarantee an absolutely perfect TFT
display. Wacom does not allow any pixel to be always white or always
black. A small number of pixels are allowed to show a wrong color for
some parts of the color spectrum. This does not mean the display is
defective.