Filter
Top Products
68
Contents Index
68
IndexContents
68
IndexContents
TESTING THE TABLET CONTROLS AND TOOLS
If your Intuos Pro tools or tablet controls do not work as you expect, it is a good idea to first check the
assigned functions or reset them to their default conditions. You will also want to do this if you have a
touch-sensitive tablet model and encounter problems with touch.
A quick way to return a tool to its default condition is to remove it from the control panel T
OOL list. Do this
by selecting the tool and clicking on the T
OOL list [ – ] button. After the tool has been removed, place it back
onto the tablet surface. The tool will be added back to the T
OOL list with its default settings.
• Open the Wacom Tablet control panel and click on the A
BOUT button. In the dialog box that appears,
click D
IAGNOSE.... The DIAGNOSTICS dialog box shows dynamic information about the tablet, your tool(s),
and appropriate information for touch-sensitive tablets.
• If more than one tablet is connected to your system, in the T
ABLET INFO column select the unit for which
you are testing.
• Use the information shown in the D
IAGNOSTICS dialog box when testing your tablet and tools.
Note: If a tool button is set to R
ADIAL MENU or OPEN/RUN..., that function will occur when the button is
pressed. In this case you may want to change the button function before testing.
Testing the ExpressKeys
Testing the Touch Ring
Testing a pen