Filter
Top Products
17-10
Command Reference Guide
/UL Unlock Port (Invalid Access Lockout)
Manually cancels the MPC’s Invalid Access Lockout feature. Normally, when a series of
failed login attempts are detected, the Invalid Access Lockout feature can shut down the
network port for a user specified time period in order to prevent further access attempts.
When the /UL command is invoked, the MPC will immediately unlock all network ports
that are currently in the locked state.
Availability: Administrator
Format:
/UL [Enter]
Response: The MPC will unlock all MPC RS232 Ports.
17.3.3. Configuration Commands
/F Set System Parameters
Displays a menu which is used to define the Site ID message, create user accounts, set
the system clock, and configure and enable the Invalid Access Lockout feature. Note
that all functions provided by the /F command are also available via the Web Browser
Interface. For more information, please refer to Section 5.3.
Availability: Administrator
Format:
/F [Enter]
/P Set Serial Port Parameters
Displays a menu that is used to select options and parameters for the MPC's Serial
Console Port, Remote Port and AUX Ports. Note that all functions provided by the /P
command are also available via the Web Browser Interface. Section 5.8 describes
the procedure for defining serial port parameters for both the Console Port and RJ-45
Remote and AUX ports.
Availability: Administrator
Format:
/P <n> [Enter]
Where n is used to indicate the Console Port or AUX/Remote ports. The available
command arguments are "1" (Console Port) or AUX (AUX and Remote Ports.)
/PL Set Plug Parameters
Displays a menu that is used to select options and parameters for the MPC's switched
outlets (plugs). Note that all functions provided by the /PL command are also available
via the Web Browser Interface. Section 5.7 describes the procedure for defining plug
parameters.
Availability: Administrator
Format:
/PL [Enter]