Filter
Top Products
SCPI Command Summary
TM-XDOP-01XN C–11
Query Power On
Status Clear
*PSC?
[:]STATus[<channel>]:POSClear?
Query Power-On Status Clear
setting
N/A
Power-On Status
Clear
*PSC
[:]STATus[<channel>]:POSClear <on-off-state>
Controls the automatic power-on
clearing of the Service Request
Enable Register, Standard Event
Status Enable Register, Parallel
Poll Enable Register and other
event enable registers. Possible
values are 0 (leave them alone) or
1 (clear them).
N/A
Recall
*RCL
[:]SYSTem[<channel>]=RECall <setting_location>
Restores the settings of unit from
values stored in memory.
N/A
Reset
*RST
[:]SYSTem[<channel>]:RESet
Performs a device reset. Set the
power supply to a known state that
is independent of the use history
of the device.
N/A
Save User Settings
*SAV
[:]SYSTem[<channel>]:SAVE[USER]
<setting_location>
Stores the current setting of the
device in local memory. Scope is
same as *RST
N/A
Save Default
Settings
*SDS
[:]SYSTem[<channel>]:SAVE:DEFault
<setting_location>
Save the factory default settings. N/A
Query Service
Request Enable
*SRE?
[:]STATus[<channel>]:SREQuest:ENABle?
Query the Service Request Enable
Register bits.
N/A
Service Request
Enable
*SRE
[:]STATus[<channel>]:SREQuest:ENABle <status-
enable>
Set the Service Request Enable
Register bits.
N/A
Read Status Byte
*STB?
[:]STATus[<channel>]:SBYTe[EVENt]?
Read the status byte and Master
Summary Status bit.
N/A
Table C-1
IEEE 488.2 Commands
Function SCPI Commands Description Query
TM-XDOP-01XN.book Page 11 Monday, July 17, 2006 11:19 AM