Filter
Top Products
2750 op#2 R3.doc 10-02 Page 2-12
Raising the drum faceplate shutter
The drum faceplate is mounted on the drum
shaft at the end nearest to the operator’s
control panel.
The crank handle could cause serious injury if engaged in the drum
faceplate while the folder is operating. Springs on the crank hand pins
and shutters over the drum ends are designed to prevent this. Do not try
to defeat these safet
y
features.
Using the crank handle to rotate the drum
Open the faceplate shutter, then engage the
crank handle. Because the crank handle is
spring loaded, constant pressure is required to
hold it in place.
Use the “jog” feature …
You can clear paper through the infeed
rollers under power. Press the
MORE
button on the control panel to display
System Menu, then press 1. Select Infeed
Jog
, forward or reverse as necessary.
Ejector springs on crank handle