Filter
Top Products
LPS OPTIONS
2-4 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS INSTALLATION PLANNING GUIDE
Printer options
The DocuPrint 96/DocuPrint 96MX LPS is available with the following
options:
• Feeder/Stacker
• Bypass Transport
• Input Enablement device
Feeder stacker
The DocuPrint 96/DocuPrint 96MX LPS has an Inverter Feeder
Stacker, and up to one optional feeder stacker.
Refer to the section “Printer components” in the “LPS overview”
chapter for information on the feeder stacker.
Bypass transport
The ability to add finishers to your DocuPrint 96/DocuPrint 96MX
LPS is made possible by the Bypass Transport option. Finishers
increase your production capabilities by providing a wide range of
finishing choices, such as stitching, shrink wrapping, and so on.
Connected to the feeder/stacker, the bypass transport allows
finishers to interface directly with your DocuPrint 96/DocuPrint 96MX
LPS. The bypass transport meets the Xerox Document Feeding and
Finishing Architecture (DFA) Level 1 specifications.
Figure 2-2 shows the DocuPrint 96/DocuPrint 96MX LPS with the
optional bypass transport and the paper output and input locations.
Figure 2-2. DocuPrint 96/DocuPrint 96MX LPS with optional
bypass transport and input enablement device
1 Bypass transport paper output location
2 Input enablement device paper input location