Filter
Top Products
Transmitting Documents
5-18 WorkCentre Pro 665/685/765/785
One Time Fax Options
Before sending a document, you can set up various options that
effect only the current job. With the document in the Document Tray,
set each option you want to apply to that job, then using one of the
dialing methods, send the fax. The following options can be set for an
individual transmission:
Option Description
Number of
Pages
Prints the designated number of pages at the top of the
recording paper for Direct Send Transmissions only.
Listen to Dial Turns the speaker ON to monitor the line tones.
ECM Disable When the ECM default mode is set to On, allows you to
disable ECM for the current transmission .
Send then
Poll
Sends a document, then polls a document from the remote
machine during the same transmission.
Secure Send
Transmission
The WorkCentre compares the number you dialed with the
remote machine’s ID. If the numbers do not match, the
document is not sent.
Send After
Scan
Once the Send After Scan Mode Default Setting is set to
Off, this feature allows you enable the Send After Scan
mode for a single transmission.