Filter
Top Products
Programming the Machine
WorkCentre Pro 665/685/765/785 2-27
19. To add a password to the sub address,
press to select PWD; or to exit this option, go to step 20.
20. Enter the numeric remote sub address password, then press
Enter.
21. To exit the sub address option, press .
22. To add an additional option, go to step 7. To exit, press and
go to step 25.
Line Selection**
23. To select either line, press .
To select Line #1, press .
To select Line #2, press .
24. To add an additional option, go to step7. To exit, press and
go to step 25 to complete the procedure.
25. To assign additional One Touch numbers, repeat steps 2-24.
26. When you have completed the One Touch Key assignments,
press
Exit
or
Stop
to return to the Standby Mode.
** Not available on some models.
Subaddress
PWD (20 max):