Filter
Top Products
Printer Options 2-15
Reference Guide 8142/8160
Printer Options
Introduction Printer Options Menu Tree Technical Info Error Messages Troubleshooting
2
To set margins
1 Press Setup Menu/Paper Option Menu/Margins.
2 Choose Normal, Expanded or Edge Band.
3 Press OK.
Auto-Load Delay
Auto-Load Delay lets you set the time between when the printer senses the media and starts to load the media.
This lets you manually reposition the media if necessary. The default is 6 seconds, selectable from a range of 1-12
seconds.
To set auto-load delay
1 Press Setup Menu/Paper Option Menu/Auto-Load Delay.
2 Choose the delay time.
3 Press OK.
Save media
When Save Media is On (the default), the media advances only as far as needed to print the image. With the
Save Media option turned Off, the printer advances the full print area of the loaded media. For example, if a 36
inch roll is loaded, the printer advances the length of the print area for a standard 36 x 48" sheet even if the
printed image is only 30 inches long.
To turn off save media
1 Press Setup Menu/Paper Option Menu/Save Media.
2 Choose Off.
3 Press OK.