Filter
Top Products
XES Synergix 8825/8830/8850/8855 Digital Solution User Guide 39
Special features keys (continued)
Printer Interrupt key
Jobs on the Synergix Digital Solution have the following priority:
1. Any job currently printing
2. A copy job that is ready to print
3. A remote print job.
If a remote print job is in progress, a copy job (one or more images captured
by the Scanner), cannot normally use the Printer until the remote print job has
finished. The Printer Interrupt key enables you to switch the copy priority
from normal to high.
To process a copy job immediately, press the Printer Interrupt key. The
Printer Interrupt indicator lamp illuminates. The current pages of the most
current remote print job are completed. Usually a maximum of two pages are
printed. The print job is then suspended and you can run copy jobs. When
the copy jobs are finished, you can press the Printer Interrupt key again.
The Printer Interrupt indicator lamp is extinguished. The interrupted remote
print job resumes.
If you send no more copy jobs, press no keys, and scan no documents, the
Printer Interrupt feature is automatically disabled after a time set by the
PRINTER INTERRUPT timer. Refer to "Timers" in the "Main Menu" section
for instructions about how to set this value. The default value is 1 minute. It
can be set to a value between 1 and 99 minutes.