Filter
Top Products
XES Synergix 8825/8830/8850/8855 Digital Solution User Guide 68
Main Menu (continued)
Control Panel
The CONTROL PANEL option of the CONFIGURATION menu controls
whether the beeper is used for the key click and invalid entry beeps. It also
allows selection of the font display style and the default mode of operation for
the Synergix Digital Solution.
To set the beeper, text style or default operating mode:
1. Press the Menu key. The MAIN MENU screen is displayed.
2. Press the Enter key to select CONFIGURATION. The
CONFIGURATION menu screen is displayed.
3. Press the Next key to select CONTROL PANEL.
4. Press the Enter key to select CONTROL PANEL. The CONTROL
PANEL screen is displayed. Below is an example of the CONTROL
PANEL screen.
5. Press the Previous or Next key to highlight BEEPER, TEXT MODE or
DEFAULT MODE.
6. Press the Enter key to select the highlighted option.
7. Press the Previous or Next key to highlight the desired setting for the
option.
The choices for BEEPER are ENABLED or DISABLED. ENABLED is the
default setting. The Initialization Beep and the Fault Beep are not
affected by this setting and cannot be turned off.
The choices for TEXT MODE are NORMAL or BOLD. NORMAL is the
default setting.
The choices for DEFAULT MODE are COPY or SCAN. COPY is the
default setting.
NOTE: The DEFAULT MODE setting will not be displayed unless the Scan
To Net feature is enabled. SCAN mode is an option on the 8825 and 8850
Digital Solutions. To order this feature, contact XES Representative.
8. Press the Enter key to select the highlighted setting.
9. Repeat steps 5 through 8 if you wish to change another setting.
10. Press the Exit key to return to the CONFIGURATION menu screen.
CONTROL PANEL
BEEPER: ENABLED
TEXT MODE: NORMAL
DEFAULT MODE: COPY