Filter
Top Products
XES Synergix 8825/8830/8850/8855 Digital Solution User Guide 60
Scanning to the Network (SCAN mode) (continued)
Switching between COPY mode and
SCAN mode
NOTE: The copy mode will be disabled and the READY TO COPY screen will
not be accessible when the SCAN OPTION (COLOR) is enabled and a color
printer is connected to the AccXES.
To switch between the COPY mode and the SCAN mode, perform the
following steps:
1. Ensure that the READY TO COPY screen is displayed. If a menu is
displayed, press the Menu key to return to the READY screen. If
PLEASE ENTER ACCOUNT is displayed, enter a valid User ID code
then enter a valid account number to obtain the READY screen.
2. Press the Mode key. The system switches to the SCAN mode and the
screen now displays. Pressing the Mode key again returns the system to
the COPY mode.
3. Enter a Directory name, up to 16 characters, to which you will scan the
images. The name cannot begin with a period/decimal point.
NOTE: The TCP/IP network protocol must be enabled in the Controller or the
Synergix Digital Solution will not enter the SCAN mode. To enable the
TCP/IP protocol, refer to the Controller Setup Manual.
PLEASE ENTER
DIRECTORY
IMAGES