Filter
Top Products
XES Synergix 8825/8830/8850/8855 Digital Solution User Guide 70
Main Menu (continued))
MEDIA SERIES
The MEDIA SERIES option controls which standard media series are
displayed when Preset is selected from the Output Format portion of the
Scanner Control Panel.
You can select one or more media series to be displayed. Refer to Table 5
on the previous page for a listing of the sizes associated with each media
series.
To enable/disable a media series:
1. Press the Menu key. The MAIN MENU screen is displayed.
2. Press the Enter key to select CONFIGURATION. The
CONFIGURATION menu screen is displayed.
3. Press the Next key until COPY OPTIONS is highlighted.
4. Press the Enter key to select COPY OPTIONS. The COPY OPTIONS
menu screen is displayed.
5. Press the Enter key to select MEDIA SERIES. The MEDIA SERIES
screen is displayed. Below is an example of the MEDIA SERIES screen.
6. Press the Previous or Next key to highlight a media series.
7. Press the Enter key to ENABLE or DISABLE the highlighted media
series. A check mark appears in the box to the left of the series when
the series is enabled.
The factory default setting is ENABLED for the ANSI media series and
DISABLED for all others.
8. Repeat steps 6 and 7 for each media series you wish to enable or
disable.
9. Press the Exit key to return to the COPY OPTIONS menu screen.
MEDIA SERES
ANSI ISO A
ARCH ISO B
JIS B