Filter
Top Products
Solving Print Quality Problems
5-36 ❖ User Guide
Unfused or partially
fused image
The printed image is not
fully fused to the paper
and easily rubs off.
Damp paper stock. Replace paper stock.
Heavy or unusual paper stock. Use only approved paper/media. (See
Table 2.1 on page 2-4).
Defective Fuser. Replace the Fuser. See the
System
Administrator Guide
on the Product CD for
ordering and installation instructions.
Wrinkled prints
Prints are wrinkled,
creased, or torn.
Poor paper condition. Inspect/replace the paper stock.
Paper is damp. Replace paper stock.
Paper debris in path. Clear paper path.
Paper skew. Check paper tray guides.
Fuser is at its end of life Replace the Fuser. See the
System
Administrator Guide
on the Product CD for
ordering and installation instructions.
Table 5.3 Print Quality Problems
(continued)
Problem Possible Cause(s) Corrective Action(s)
Table 5.3 Page 6 of 8