Using Printer Utilities
Chapter 4: Printing 4-13
JOB
Use this tab to control the following printer features:
• Timeout determines the amount of time (in seconds) the printer
will wait before printing the last page of a print job that does not
end with a command to print the page or a formfeed character.
Valid range is 0 to 300 seconds.
• Paper Type provides the printer with information about the
type of paper to be used for a print job. If you use paper with a
weight of more than 42 lb. (90 g/m
2
), or an envelope, set this to
Thick and use the MP Tray’s manual feed slot. Otherwise use
the Normal setting.
• Toner Density determines the overall density of the printed
image. Valid selections are Light, Medium and Dark.
• Image Quality mode makes the printer optimize the print
quality to 1200 dpi image quality.