Filter
Top Products
Network Installation: Linux
Xerox® Phaser® 3052/3260
User Guide
30
16. Select OK.
17. The printer should now be listed in the Red Hat Linux Print System Manager window. Select the
lpd menu.
18. Select Restart lpd.
19. Select the PrintTool menu.
20. Select Exit to close the program.
21. To allow access to the printer, edit the /etc/hosts table to list the client system.
22. Edit and create the /etc/hosts.lpd file to list the client system.
Dynamic Addressing
Procedure
Follow the steps in Configure TCP/IP Settings Using CentreWare CentreWare Internet Services, then
return to this page.
Important: Highlight BOOTP in step 6.
Create the Print Queue
Follow the steps to Create the Print Queue.
Linux LPRng
Static Addressing
Information Checklist
Before starting, ensure that the following item is available and/or the task has been performed:
• Linux operating system that supports PrintTool.
Procedure
Follow the steps in Configure Static IPv4 Addressing Using the Machine User Interface, then return to
this page.
Create the Print Queue
1. Open the LPRngTool from the Linux Client.
2. Select Add.
3. In the Names area, enter a name for your print queue.
4. The spool directory is the directory where print jobs are stored and is a subdirectory of
/var/spool/lpd. Add the name of the print queue to the end of the subdirectory path.
5. In the Hostname/IP of Printer area, enter the hostname or IP Address of the Xerox machine.
6. Select OK.