Filter
Top Products
Specialty Printing
Phaser™ 4400 Laser Printer 19
Manual 2-sided printing
If the printer doesn’t have a duplex unit or if you need to duplex paper sizes or weights outside the
duplex unit’s limits, you can still have the printer print on both sides of the paper. However, you must
have the printer print all of the odd-numbered pages first, reinsert the printed pages in the tray, then
have the printer print the even-numbered pages.
You can use Trays 1, 2, or 3 or the Multi-Purpose Tray for manual 2-sided printing.
Guidelines for manual 2-sided printing
■ The application you are printing from must provide an option for printing odd pages and even
pages separately.
■ The paper must have a weight of 60 – 216 g/m
2
(16 – 80 lb.).
■ Do not use envelopes, labels, or transparencies.
Manual 2-sided printing using Trays 1, 2, or 3
Printing the odd-numbered pages
1. Insert a stack of paper into the tray. For more information, refer to the Trays section of the
Trays and Paper Guide on the Interactive Documentation CD-ROM.
The paper size can be Letter, Legal, Executive, US Folio, A4, B5 JIS, A5, or Custom sizes
between 98 – 216 mm (3.87 – 8.5 in.) wide and 148 – 356 mm (5.83 – 14.0 in.) long.
■ Portrait orientation:
Place the side to be printed with odd-numbered pages facedown with the top of the page at
the front of the tray. Prepunched holes should be toward the left of the printer.
■ Landscape orientation:
Place the side to be printed with odd-numbered pages facedown with the top of the page on
the left. Prepunched holes should be toward the left of the printer.
P4400-90
P4400-109