Filter
Top Products
Phaser™ 4400 Laser Printer
Copyright © 2002 Xerox Corporation. All Rights Reserved. 33
Output Trays
You can send output to the following trays:
To change the default output destination on the front panel:
1. With
Menus highlighted, press the OK key.
2. Scroll to
Printer Setup Menu using the Up Arrow or Down Arrow key.
3. Press the OK key.
4. Scroll to
Job Defaults Menu and press the OK key.
5. Select
Set Paper Destination and press the OK key.
6. Select either
Standard Output Tray or Stacker and press the OK key.
The output goes to the default tray unless specifically changed in the printer driver.
Standard Output Tray
■ Default output destination.
■ Holds 500 sheets.
500-sheet Stacker (with offset)
■ Optional output device for your printer.
■ Use as an additional 500-sheet capacity output tray to
supplement the Standard Output Tray.
P4400-79
P4400-78