Filter
Top Products
Setting Up the Network
Phaser® 6300/6350 Color Laser Printer
2-4
Standalone (Cable or DSL) Network Connection
For information about setting up a cable or DSL connection for your printer, go to
www.xerox.com/office/6300_6350infoSMART
.
See also:
infoSMART Knowledge Base Networking Documents (English only) on page 2-12
Connecting via USB
If you are connecting to one computer, a USB connection offers fast data speeds. However, a
USB connection is not as fast as an Ethernet connection. To use USB, PC users must have
Microsoft Windows 98 SE, Windows Me, Windows XP, or Windows 2000. Macintosh users
must use Mac OS 9.x and higher.
USB Connection
A USB connection requires a standard A/B USB cable. This cable is not included with your
printer and must be purchased separately. Verify that you are using the correct USB cable for
your connection.
1. Connect one end of the USB cable to the printer and turn it on.
2. Connect the other end of the USB cable to the computer.
See also:
Configuring the Network Address on page 2-5
Installing the Printer Drivers on page 2-9