Filter
Top Products
Printing on Specialty Media
Phaser® 6300/6350 Color Laser Printer
3-40
2. Pull out the tray extension, and open the paper guides.
3. Insert the paper into Tray 1 (MPT), and adjust the paper guides to fit the paper.
■ The paper can be loaded with either the long or short edge entering first, as shown in
the illustrations.
■ The maximum width (X) is 212.5 mm (8.5 in.).
■ For single-sided printing, if you are using preprinted or prepunched paper, place the
side to be printed facedown with the top of the paper entering the printer first.
■ For 2-sided printing, if you are using preprinted or prepunched paper, place the first
side to be printed faceup with the bottom of the page entering the printer first.
4. On the control panel, select Change setup, and then press the OK button.
5. Select the paper type, and then press the OK button.
6. Do one of the following:
■ If your custom paper size is listed in the menu, select it, and then press the OK button.
■ If your custom paper size is not listed in the menu, select New Custom Size, and
then press the OK button.
Long-Edge Feed Short-Edge Feed
6300-007
H
6300-111
X
H
6300-112
X