Filter
Top Products
Xerox DP1015 User’s Guide 27
Maintenance
Maintenance
Changing the Lamp
The projector’s lamp life is approximately 1500 hours of use. The
projector automatically monitors the lamp life. After 1500 hours of
use, the projector displays a message that the lamp life is over and
the lamp needs to be replaced.
When you see the message, please change the lamp as soon as
possible.
Warning—The lamp module is the only user-replaceable part in
the projector. To prevent electric shock, do not open the projector
case.
Warning—To reduce the risk of personal injury, do not drop the
lamp module or touch the lamp bulb. The high-pressure lamp
module may explode if handled incorrectly, and may shatter and
cause injury if dropped.
Warning—The lamp compartment is hot! Allow the projector to
cool down at least thirty minutes.
To change the lamp module
1. Turn off the projector’s power.
2. Disconnect the power cord.
3. Let the projector lamp cool completely, at least thirty minutes.
4. Use a screwdriver to remove the cover screw.
5. Then, press down on the cover lock to free the cover.
Cover Lock