Xerox 1235/DX Printer User Manual


 
Protocol Control
System Administrator Guide
3-6
Protocol Control
This section includes:
HTTP on page 3-6
TCP/IP on page 3-7
Port 9100 on page 3-7
LPR on page 3-8
IPP (Internet Printing Protocol) on page 3-8
SNMP (Simple Network Management Protocol) on page 3-9
FTP (File Transfer Protocol) on page 3-9
Email Server or SMTP (Simple Mail Transfer Protocol) on page 3-10
MaiLinX Remote Printing on page 3-11
MaiLinX Alerts on page 3-12
See also:
Discovery Protocols on page 2-5
All network protocols, including network printing, printing services, printer discovery, and
management protocols can be enabled or disabled on the printer. If a protocol is enabled, you
can set configuration parameters.
Note: To secure protocols, disable any protocols you are not using. This prevents
unauthorized access through applications that use these protocols. For example, if you want to
use IPP for a secure printing channel, disable the other printing protocols, Port 9100 and LPR.
HTTP
By default, HTTP is enabled. For information on disabling HTTP, contact Xerox Technical
Support at www.xerox.com/support
.
See also:
About HTTP, HTTPS, and SSL/TLS on page 4-3