Filter
Top Products
System Administrator Guide
B-4
Input Trays
The following table lists the most common PCL commands for the input trays supported by
your printer. The table also lists the alternate tray used if the optional input tray is not installed.
Note: When more than one command is listed, you can use either command.
Input Trays
Phaser 6360
Phaser 8560
Phaser 8860 Phaser 4510
PCL 5
Command
Alternate
Tray
PCL 5
Command
Alternate
Tray
Tray 1 n/a n/a <Esc>&l2H
<Esc>&l3H
<Esc>&l4H
<Esc>&l6H
n/a
Tray 1 (MPT) in multi-sheet
mode
<Esc>&l4H
<Esc>&l6H
n/a n/a n/a
Tray 1 (MPT) in manual feed
mode
<Esc>&l2H
<Esc>&l3H
n/a n/a n/a
Tray 2 <Esc>&l1H n/a <Esc>&l1H
<Esc>&l21H
<Esc>&l22H
n/a
Tray 3 <Esc>&l5H Tray 2 <Esc>&l5H Tray 1
Tray 4 <Esc>&l8H
<Esc>&l20H
Tray 1 <Esc>&l8H
<Esc>&l20H
Tray 1
Tray 5 <Esc>&l21H Tray 1 n/a n/a
Autoselect <Esc>&l7H n/a <Esc>&l7H n/a
Current tray/page eject <Esc>&l0H n/a <Esc>&l0H n/a
* The character that follows the “&” in the command is the lowercase letter “L”.