Filter
Top Products
SP601 Hardware User Guide www.xilinx.com 47
UG518 (v1.1) August 19, 2009
Appendix B
Default Jumper and Switch Settings
Table B-1 shows the default jumper and switch settings for the SP601.
Table B-1: Default Jumper and Switch Settings
REFDES Type/Function Default
SW1 SLIDE, POWER ON-OFF OFF
SW2 DIP, 2-POLE, MODE
1M0 ON (1)
2 M1 OFF (0)
SW8 DIP, 4-POLE, GPIO
1OFF
2OFF
3OFF
4OFF
J4 HDR_1X3, JTAG BYPASS JUMP 1-2 (EXCLUDE FMC)
J14 HDR_1X2, SUSPEND OPEN (0 = AWAKE)
J15 HDR_1X2, SPI SELECT ON (U17 SPI MEM SELECTED)