Filter
Top Products
Introduction
16 Command View EVA Storage System Scripting Utility Reference Guide
3. Mount the CD-ROM with the command:
# mount /dev/dsk/c3t2d0 /cdrom
4. Copy the depot file from the CD-ROM to a temporary directory on the host
system.
# cp /cdrom/sssu_v7_hpux.depot /tmp
5. Enter the following command to run the installation program (swinstall):
# swinstall -s /tmp/sssu_v7_hpux.depot
The SSSU executable is installed in the following directory:
#/sbin
To execute SSSU
■ Command line version, type
#sssu
Installing the IBM Host Kit
The IBM AIX Kit v3.0e for Enterprise Virtual Array installs the supported FCA
driver and the Storage System Scripting Utility (SSSU).
The HSV controllers can be configured with SSSU as an alternative to the
Command View EVA Element Manager. SSSU allows a command line interface
for issuing commands directly to the controller. Complex configuration requests
and operations can be handled by either the Command View EVA Element
Manager or SSSU. Simple or initial configuration requests can be handled easily
and expediently through the element manager, but repetitious and complex
configuration steps can be scripted and executed through the command line
interface.
The CAPTURE CONFIGURATION command is the only way to capture, save,
and recreate a storage system’s configuration.
The following section describes how to install and uninstall the IBM AIX Kit,
including the Secure Path driver on the IBM AIX host server. The Secure Path
driver is necessary for your IBM AIX server to interact with the Enterprise Virtual
Array.
1. Mount the AIX platform kit.
2. Go to the /aix_spec directory.