Filter
Top Products
SSSU Command Reference
37Command View EVA Storage System Scripting Utility Reference Guide
Use the ADD HOST command to add a host and its World Wide Name (WWN) to
the list of hosts that can connect to virtual disks within the current system.
The ADD HOST command adds the first Fibre Channel Adapter (FCA) only. The
SET HOST command (see page 80) adds each subsequent FCA.
Syntax
ADD HOST <host_name> WORLD_WIDE_NAME=<world_wide_name>
Switches
The following switches are available with the ADD HOST command.
IP=
This is the network IP address. If the IP address is not specified, the name of the
host will be specified as is (DNS).
COMMENT=
This is an optional switch that associates a user-defined comment with the new
system. A maximum of 128 characters is allowed, and the string must be enclosed
in double quotes.
OPERATING_SYSTEM=
The type of operating system for the specified host. Choose one of the following
operating systems (they are spelled here as SSSU expects):
■ CUSTOM
The correct syntax is
OPERATING_SYSTEM=CUSTOM=<16 hex characters>
■ HPUX
■ IBMAIX
■ OPEN_VMS
■ SOLARIS
■ TRU64
■ UNKNOWN
ADD HOST