Filter
Top Products
Introduction
23Command View EVA Storage System Scripting Utility Reference Guide
Understanding paths and naming conventions
This section describes important information about paths and naming conventions
in SSSU.
Note: For detailed descriptions of the following commands, refer to Chapter 2.
hi
The following important root folders let you organize your storage system:
■ “\Hosts\”
■ “\Virtual Disks\”
■ “\Disk Groups\”
■ “\Data Replication\”
■ “\Hardware\” - This folder exists within SSSU; however, you cannot
create any objects within this folder.
You cannot create root-level folders. You can, however, create additional folders
within the “\Hosts\” and “\Virtual Disks\” folders to organize your
storage system (see “ADD FOLDER”on page 36).
Note: SSSU requires that you qualify specified names with full paths. If, however, you
are using the default placement when adding Hosts and Virtual Disks, you do not need
to include the full path.
Hosts Examples
For example, to add a host named engineering to the root Hosts folder:
ADD HOST engineering WORLD_WIDE_NAME=1111-2222-3333-4444
Whenever you refer to this host, you must give the full path. For example, when
adding a LUN to this host:
ADD LUN 4 HOST=\Hosts\engineering VDISK="\Virtual
Disks\Yekao\ACTIVE"