Filter
Top Products
Connecting external components such as a TV or DVD player to this unit.
Connect your TV or DVD player to this unit using appropriate cables as shown below. After all connections are complete, plug the power supply cable into the AC
wall outlet. For further information on connecting other components, see pages 20 to 31 in the Owner’s Manual.
YSP-4000
QUICK REFERENCE GUIDE
C2007 All rights reserved.
Printed in Malaysia WK94420 [En]
Decide where to install this unit.
Install this unit where there are no objects such as furniture obstructing the path of sound beams. Otherwise, the desired
surround sound effects may not be achieved. You may install this unit in parallel with the wall or in the corner.
Connecting external components to this unit
Installing this unit
This quick reference guide explains steps to connect a TV and a DVD player to this unit and achieve the
surround sound effects in a quick, easy manner. For detailed operation, refer to the Owner’s Manual.
Install this unit using a rack, etc.
Depending on your installation environment, connections with external components (see “2 Connecting external components to this unit”) can be done before
installing this unit. We recommend that you temporarily place and arrange all components in order to decide which procedure must come first. In case you
install this unit on top of a rack, etc., use the supplied fasteners to prevent an accidental fall of this unit.
For further information on installation, see page 17 in the Owner’s Manual.
Install this unit in the exact center of the wall when it is
measured from the left and right corners.
Install this unit in the corner at a 40˚ to 50˚ angle from the
adjacent walls.
40˚ to 50˚
An object, such as furniture An object, such as furniture
Items used for connections and operations
in this guide
s
Audio pin cable (x1)
s
OSD* video pin cable (x1)
s
Optical cable (x1)
s
Coaxial cable (x1)
s
AC power supply cable (x1)
s
IntelliBeam microphone (x1)
s
Cardboard microphone stand (x1)
s
Demonstration DVD (x1)
*OSD: On-Screen Display
Connection
example 1
If you have connected external components,
follow the steps on the backside to start the
AUTO SETUP procedure.
Continued
on the back
Front left channel
Center channel
Front right channel
Surround left channel
Surround right channel
Front left channel
Center channel
Front right channel
Surround left channel
Surround right channel
This connection example shows a way to connect external components such as a TV or DVD player to
this unit by using the supplied cable. You can enjoy the multi-channel audio from the DVD player and the
analog/digital audio from the TV. Use the video pin cable supplied with your DVD player to make a video
connection between your DVD player and this unit.
Connect cables in the following order.
This connection example shows a way to make the most of the capability of this unit. You can
enjoy DVD audio and video with higher quality via the HDMI cable. In case your TV does not have
a built-in digital satellite tuner, cable TV tuner, or digital airwave tuner, connect a digital satellite
tuner, cable TV tuner, or digital airwave tuner via the HDMI cable. For details, see “Connections
using HDMI cables” on page 22 in the Owner’s Manual.
Connection
example 2
If you have connected external components,
follow the steps on the backside to start the
AUTO SETUP procedure.
Continued
on the back
Supplied
The following is an example of installing this unit in a rack. To prevent this unit or the floor from being scratched, we recommend putting a piece of
cloth on the floor in step 2.
y Hint
Check whether the digital audio output of your TV and DVD
player is turned on.
Audio connection
Subwoofer
OPTICAL
COAXIAL
DVD AUX 2
AUX 1TV/STB
DIGITAL INDOCK
AUX 1STB
ANTENNA
DVD/AUX 2 AUX 1 TV/STB
AUDIO IN
VIDEO IN
SUBWOOFER
COMPONENTCOMPONENTCOMPONENT
VIDEO OUT
FM75
UNBAL.
Video
output
Coaxial
digital
output
Optical
digital
output
Analog
audio
output
RL
Video
input
2
1
DVD player
TV
YSP-4000
To the AC wall outlet
132
Pull out the cap
before
connecting the
optical cable,
and then check
the direction to
insert the
cable.
Do not plug the power supply
cable into an AC wall outlet
until all connections are
complete.
1. Pull out the cap
2. Check the direction
Video connection
* The rear panel illustration
shows jacks and their names to
help you find them easily.
They are not exactly the same
as the ones on the actual rear
panel of this unit.
4
5
1 Audio pin cable
(Outputs TV analog audio sounds from this unit)
2 OSD video pin cable
(Displays the DVD analog video and the YSP-4000 menu
screen on the TV)
3 Optical cable
(Outputs TV digital audio sounds from this unit)
4 Digital audio pin cable
(Outputs DVD digital audio sounds from this unit)
5 AC power supply cable
(Connects this unit to the AC wall outlet)
HDMI
INPUT
HDMI
OUTPUT
HDMI
OUT
IN
DVD
AUX1
AUX 1
ANTENNA
DVD/AUX 2 AUX 1 TV/STB
AUDIO IN
VIDEO IN
SUBWOOFER
COMPONENT
A
L.
To the AC wall outlet
DVD player
TV
YSP-4000
Do not plug
the power
supply cable
into an AC wall
outlet until all
connections
are complete.
Sold separately
Connect cables in the following order.
1 (Sold separately) 2 (Sold separately)
* The rear panel illustration
shows jacks and their names to
help you find them easily.
They are not exactly the same
as the ones on the actual rear
panel of this unit.
Audio connection
Subwoofer
Digital satellite tuner/Cable TV tuner/
Digital airwave tuner
This connection is not
necessary if your TV has a
built-in digital satellite tuner,
cable TV tuner, or digital
airwave tuner. Use the optical
cable supplied with this unit to
make an audio connection
between your TV and this unit.
For details, see “Connection
example 1”.
3 Install this unit in the
rack.
1 Place this unit in front of
the rack.
2 Place this unit upside
down and connect this unit
to your TV and DVD player.
4 Installation is completed.
Supplied
3 AC power supply cable
(Connects this unit to the AC wall outlet)
1 HDMI cable
(Displays the DVD digital video and the YSP-4000 menu
screen on the TV)
2 HDMI cable
(Inputs DVD digital audio/video signals to this unit)
1
2
3
y Hint
•To enjoy better surround effects, place this unit on the upper shelf to keep it away from the floor.
•You can also use the optional metal wall bracket (sold separately) to mount this unit on the wall. For details, refer to the instructions
supplied with the metal wall bracket.
Note
Be careful not to leave scratches on this unit or the rack.
y Hint
If you connect this unit to an HDMI control-compatible TV (except
some models) via HDMI, you can use the remote control supplied
with your TV to turn on or off the power, select the audio output
component, and adjust the volume level of this unit.
Note
Check whether the digital audio output of your TV and DVD player is
turned on.
HDMI connection
0810_YSP-4000_En_guide.p65 8/10/07, 10:52 PM1