Filter
Top Products
Using SET MENU
35 En
SETUP
English
The following diagram illustrates the overall flow of the setup procedure.
The flow chart of SET MENU
Run AUTO SETUP (IntelliBeam).
See “AUTO SETUP (IntelliBeam)” on page 37.
Look for a remedy.
See “Error messages for AUTO SETUP” on page 43 for a complete list of error
messages and possible remedies.
Play back audio signals or adjust the settings for the beam mode and the CINEMA DSP.
See “Playback” on page 47, “Enjoying surround sound” on page 56, and “Using sound field programs” on
page 65.
Run MANUAL SETUP.
See “MANUAL SETUP” on page 76.
y
• If you cannot clearly hear a sound beam from a specific channel, adjust settings for
SETTING PARAMETERS (see page 78) or for BEAM ADJUSTMENT (see page 79) in
BEAM MENU.
• If there are acoustically absorbent objects such as curtains in the path of the sound beams,
adjust settings for TREBLE GAIN in BEAM MENU (see page 81).
If an error occurs
If you want to make additional settings
and adjustments
Run LANGUAGE SETUP.
See “Changing OSD language” on page 36.