Filter
Top Products
Selecting the input mode
93 En
ADVANCED
OPERATION
English
You can select the type of audio input signals of the selected input source according to your preference or the conditions
of the input source. This function is available for TV/STB, DVD, AUX1, and AUX2.
y
We recommend setting the input mode to AUTO in most cases.
1 Set the operation mode selector to YSP.
2 Press one of the input selector buttons to
select the desired input source.
3 Press INPUTMODE repeatedly to toggle
between input modes.
ANALOG is not available as the input mode of DVD and
AUX2.
•AUTO
Automatically selects audio input signals in the following
priority order:
1) HDMI
2) Digital
3) Analog
y
Use this input mode in most cases.
•DTS
Selects only digital signals encoded in DTS.
Compared to AUTO, this input mode provides greater
stability while playing back CDs or LDs encoded in DTS.
• ANALOG
Selects only analog signals.
Even when both digital and analog signals are input
simultaneously, only analog signals are selected.
y
You can adjust the default input mode to be selected when the
power of this unit is turned on by adjusting INPUT MODE in
INPUT MENU (see page 85).
Selecting the input mode
STEREO
MY BEAM MY SUR.
PRESET/TUNE
MEMORYSEARCH
SLEEP
INPUTMODE
ENHANCER MENU
RETURNDISPLAY
ENTER
SUR. DECODEOFF
SPORTS
5BEAM ST+3BEAM 3BEAM
MUSIC MOVIE
VOL MODE
AUTO
SETUP
CATFM/XM
MACRO
TV
INPUT1
ENTRY
CAT/
A-E
4
6
321
AUX1 AUX2
STB
TV
DVD
AUX3
TV
DOCK
+10
0
789
5
AV
YSP
TV/AV
(U.S.A. and Canada models)
YSP
TV/AV
AUX2AUX1DVD
STB
TV
Note
TV/STB AUTO
TV/STB DTS
TV/STB ANALOG
DVD AUTO
DVD DTS
AUX1 AUTO
AUX1 DTS
AUX1 ANALOG
INPUTMODE
When TV or STB is selected
as the input source
When DVD is selected
as the input source
When AUX1 is selected
as the input source
AUX2 AUTO
AUX2 DTS
When AUX2 is selected
as the input source