Filter
Top Products
87 En
MANUAL SETUP
ADVANCED
OPERATION
English
VIDEO INFO (Video information)
Use to display the video information of the current input
signal.
Choices: HDMI SIGNAL, HDMI RES., HDMI ERROR
• Select HDMI SIGNAL to display the type of the
HDMI input/output signals.
• Select HDMI RES. to display the resolution of the
HDMI input/output signals.
• Select HDMI ERROR to display the error message for
HDMI sources or devices connected
(see page 111 for details).
UP-SCALING (HDMI up-scaling)
Use this feature to activate or deactivate the HDMI up-
conversion of the analog video signals input at the
composite video and component video jacks so that the
up-scaled analog video signals are output at the HDMI
OUT jack. This unit up-scales the analog video signals as
follows:
• 480i (NTSC)/576i (PAL) → 480p (NTSC)/576p (PAL),
1080i or 720p
• 480p (NTSC)/576p (PAL) → 1080i or 720p
Choices: OFF, THROUGH, 480p (or 576p), 1080i, 720p
• Select OFF to deactivate the HDMI up-conversion
feature
• Select THROUGH not to up-scale any analog video
signals.
• Select 480p (or 576p), 1080i, or 720p to up-scale
analog video signals to 480p (or 576p), 1080i, or 720p
of resolution.
• When “MONITOR CHECK” is set to “YES”, this unit receives
the information of the available video signal resolutions from
the video monitor connected via HDMI and you can only select
the resolutions supported by the video monitor in “UP-
SCALING” (see page 97).
• When “MONITOR CHECK” is set to “SKIP”, an asterisk (*)
appears on the left of the unavailable video signal resolution(s)
(see page 97).
ASPECT RATIO (HDMI aspect ratio)
Use this feature to select the adjustment of aspect ratio for
analog video signals output at the HDMI OUT jack.
Choices: THROUGH, 16:9 Normal, Smart Zoom
• Select THROUGH if you do not make any adjustments
to the aspect ratio for HDMI video signal sources.
• Select 16:9 Normal to display video images with 4:3 of
aspect ratio on your video monitor with 16:9 of aspect
ratio. Black stripes appear on the right and left sides as
a result.
• Select Smart Zoom to fit video images with 4:3 of
aspect ratio to your video monitor with 16:9 of aspect
ratio.
• When “UP-SCALING” is set to “THROUGH”, you cannot
make any adjustments to “ASPECT RATIO”.
• When “ASPECT RATIO” is set to “Smart Zoom”, the video
images of the edge of the video monitor are rather stretched.
• When the video signals are input at the HDMI IN jacks or the
signals are input with 720p or 1080i of resolution, the
“ASPECT RATIO” setting does not affect the video signals
output at the HDMI OUT jack.
HDMI CONTROL (HDMI control)
Use this function to link this unit and an HDMI control-
compatible TV via HDMI. You can turn on or off the
power, select the input mode, and adjust the volume level
of this unit using the remote control supplied with your
HDMI control-compatible TV. For details, see “Using the
HDMI control feature” on page 75.
Choices: OFF, ON
HDMI SIGNAL;;;HDMI -> HDMI
HDMI RES.;;;;1080P -> 1080P
HDMI ERROR;;;----
[ ]/[ ]:Up/Down
[ENTER]:Return
b)VIDEO INFO
p
p
.
HDMI UP-SCALING;;;*720p
XXX(480pXX1080iXXX*720p)XX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
[ ]/[ ]:Select
[ENTER]:Return
p
p
c)UP-SCALING
Notes
Notes
HDMI ASPECT RATIO;;;THROUGH
XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
[ ]/[ ]:Select
[ENTER]:Return
p
p
d)ASPECT RATIO