Filter
Top Products
85 En
MANUAL SETUP
ADVANCED
OPERATION
English
■ INPUT MODE (Input mode)
Use to designate the input mode for the input sources
connected to the DIGITAL IN jacks when you turn on the
power of this unit. For information on the types of audio
signals that can be output by this unit, see “Selecting the
input mode” on page 93.
Choices: AUTO, LAST
• Select AUTO to set this unit to automatically detect the
type of input signals and select the appropriate input
mode.
• Select LAST to set this unit to automatically select the
last input mode used for that input source. If the type of
input signals is different from the setting, no sounds
will be produced.
■ INPUT TRIM (Input trim)
Use to adjust the input level of the input source.
• Select TV/STB ANALOG to adjust the level of audio
and video signals input at the TV/STB AUDIO IN
jacks of this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
• Select TV/STB DIGITAL to adjust the level of audio
and video signals input at the TV/STB OPTICAL
DIGITAL IN jack of this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
• Select DVD DIGITAL to adjust the level of audio and
video signals input at the DVD COAXIAL DIGITAL
IN jack of this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
• Select AUX1 ANALOG to adjust the level of audio and
video signals input at the AUX 1 AUDIO IN jacks of
this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
• Select AUX1 DIGITAL to adjust the level of audio and
video signals input at the AUX 1 OPTICAL DIGITAL
IN jack of this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
• Select AUX2 DIGITAL to adjust the level of audio and
video signals input at the AUX 2 COAXIAL DIGITAL
IN jack of this unit.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
• Select AUX3 ANALOG to adjust the level of audio
signals input at the AUX 3 input jack on the front
panel.
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
• Select DOCK ANALOG to adjust the level of audio
signals input at the DOCK terminal of this unit
(U.S.A., Canada, and Australia models only).
Control range: –6.0 dB to 0.0 dB
Initial setting: –3.0 dB
HDMI
HDMI1;;;; AUX1
( AUX1 )
HDMI2;;;; DVD
( DVD )
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
A)INPUT ASSIGNMENT 1/3
p
p
.
p
p
COMPONENT
Line1;;;;TV/STB
( TV/STB )
Line2;;;; DVD
( DVD )
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
A)INPUT ASSIGNMENT 2/3
p
p
.
p
p
COMPOSITE
Line3;;;; AUX2
( AUX2 )
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
A)INPUT ASSIGNMENT 3/3
p
p
.
p
p
AUTO LAST
[ ]/[ ]:Select
[ENTER]:Return
p
p
B)INPUT MODE
p
TV/STB ANALOG;;;-3.0dB
DIGITAL;;-3.0dB
DVD DIGITAL;;-3.0dB
[ ]/[ ]:Up/Down [ ]/[ ]:Sel
[ENTER]:Return
C)INPUT TRIM 1/2
p
p
.
p
p