Filter
Top Products
145
Specifications
Media Specifications
6/6/08 Z Series
®
/RZ™ Series User Guide 79695L-002 Rev. A
Media Specifications
Media Specifications ZM400/RZ400 ZM600/RZ600
Label length Minimum Non-RFID
Tear-off 0.5 in. 13 mm 0.5 in. 13 mm
Peel-off 0.5 in. 13 mm 0.5 in. 13 mm
Rewind 0.5 in. 13 mm 0.5 in. 13 mm
Cutter 1 in. 25.4 mm 1.0 in. 25.4 mm
RFID Varies for each transponder type*
Maximum 200 or
300 DPI
39 in. 991 mm 39 in. 991 mm
600 DPI 20 in. 508 mm N/A N/A
Label width Minimum Non-RFID 1 in. 25.4 mm 2 in. 51 mm
RFID Varies for each transponder type*
Maximum Tear/Cutter 4.5 in. 114 mm 7.0 in. 178 mm
Peel/Rewind 4.25 in. 108 mm 6.75 in. 171 mm
Total thickness
(includes liner, if any)
Minimum 0.0023 in. 0.058 mm 0.0023 in. 0.058 mm
Maximum 0.010 in. 0.25 mm 0.010 in. 0.25 mm
Core size 3 in. 76 mm 3 in. 76 mm
Maximum roll diameter 8 in. 203 mm 8 in. 203 mm
Maximum fanfold pack size
(length x width x height)
8.0 in. ×
4.5 in. ×
6.2 in.
203 mm ×
114 mm ×
157 mm
8.0 in. ×
7.0 in. ×
6.2 in.
203 mm ×
178 mm ×
157 mm
Inter-label gap Minimum 0.079 in. 2 mm 0.079 in. 2 mm
Preferred 0.118 in. 3 mm 0.118 in. 3 mm
Maximum 0.157 in. 4 mm 0.157 in. 4 mm
Ticket/tag notch size (width x length) 0.25 in. ×
0.12 in.
6 mm ×
3 mm
0.25 in. ×
0.12 in.
6 mm ×
3mm
Hole diameter 0.125 in. 3 mm 0.125 in. 3 mm
Notch or hole position (Centered
from inner media edge)
Minimum 0.15 in. 3.8 mm 0.15 in. 3.8
Maximum 2.25 in. 57 mm 3.5 in. 90 mm
Black mark
dimensions
Vertical length 0.098 in. to
0.453 in.
2.5 to
11.5 mm
0.098 in. to
0.453 in.
2.5 to
11.5 mm
Horizontal width >
0.37 in. > 9.5 mm > 0.37 in. > 9.5 mm
Location Within 0.40 in. (1 mm) of inside media edge
Density, in Optical Density Units (ODU) > 1.0 ODU
Maximum media density 0.5 ODU
* See http://www.zebra.com/id/zebra/na/en/index/products/supplies/rfid_supplies/rfid_transponder_inlay.html for transponder
placement information.