Filter
Top Products
H-974
PAGE 35 OF 57
0808 IH-974
50 Zebra Z4M Printer User’s Guide
Selecting ZPL Mode
Display Shows Action/Explanation
ZPL MODE
Selecting ZPL Mode Press the INCREMENT (+) or DECREMENT (-) key to
display other choices.
Default: ZPL II
Selections: ZPL II, ZPL
The printer will remain in the s elected mode until it ischanged by this front panel
instruction or by using a ZPL/ZPL II c ommand. The printer accepts label formats
written in either ZPL or ZPL I I. This eliminates the need to r ewrite any ZPL f ormats
you already have. Refer to the ZPL II P rogramming Guide Volume II for m ore
information on the differences between ZPL and ZPL II .
Power-Up and Head Close Parameters
MEDIA POWER UP
Media Power-Up Press the INCREMENT (+) or DECREMENT (-) key to
display other choices.
Default: Feed
Selections: Feed, calibration, length, and no motion
This parameter establishes the action of the media when the printer is turned
on.
• Calibration: Recalibrates the media and ribbon sensors.
• Feed: Feeds the label to the first web.
• Length: Determines the length of the label.
• No Motion: Media does not move.
HEAD CLOSE
Head Close Press the INCREMENT (+) or DECREMENT (-) key to display
other choices.
Default: Feed
Selections: Feed, calibration, length, no motion
Determines the action of the media after the printhead has been opened and
then closed.
• Calibration: Recalibrates the media and ribbon sensors.
• Feed: Feeds the label to the first web.
• Length: Determines the length of the label.
• No Motion: Media does not move.