Filter
Top Products
H-974
PAGE 40 OF 57
0808 IH-974
54 Zebra Z4M Printer User’s Guide
Display Shows Action/Explanation
LANGUAGE
Selecting the Display Language Press the INCREMENT (+) or DECREMENT (-)
key to display other choices.
Default: English
Selections: English, Spanish, French, German, Italian, Norwegian,
Portuguese, Swedish, Danish, Spanish 2, Dutch, Finnish, Japan
This parameter allows you to change the language used on the front panel
display.
You have now completed the entire configuration and calibration sequence. You may either press
the SELECT key or the SETUP/EXIT key.
DARKNESS
You are now back at the first parameter in the configuration sequence.
NOTE: If you pressed the SELECT key but are through programming the
printer configuration, you may press the SETUP/EXIT key and continue
with the “SAVE SETTINGS” function.
SAVE SETTINGS
Save Settings Press the INCREMENT (+) or DECREMENT (-) key to display
other choices.
Default: Permanent
Selections: Permanent, temporary, cancel, load defaults, load last save.
This display appears when you attempt to exit the configuration mode.
• Permanent: Permanently saves the changes, even when printer power is
turned off.
• Temporary: Saves the changes until changed again or until power is turned
off.
• Cancel: Cancels all changes since you entered the configuration mode
except for darkness and tear-off position (if they were changed).
• Load defaults: Loads factory defaults.
• Load last save: Loads the values from the last permanent save.
PRINTER READY
Press the SETUP/EXIT key to activate the displayed choice.
You have exited the configuration and calibration sequence and are now ready
for normal printer operation.