Filter
Top Products
2-6 \ Zhone Technologies
Model No.
Running Head
Locating the product on a desktop Installing the Z-Plex
2.5 Locating the product on a desktop
Each unit can be easily set on top of a desk or table. A stable environment is necessary for
peak performance of each unit. The chassis should be placed on a flat, smooth surface, such
as a table, that is free of contaminants. This surface should be capable of supporting a fully
equipped chassis. Be sure to allow enough clearance above and below the chassis for proper
air circulation. The metal brackets and feet furnished with the chassis must be used for this
purpose.
2.6 Wall mounting
Prior to wall mounting check to see if the environment is stable and free from any extreme
temperatures, humidity or vibrations of any sort. The unit should be mounted with the fan to
the top with at least 2 inches of clear space on the sides, above, and below for adequate air
flow. Allow at least 6 inches for cable clearance.
When attaching unit(s) to a wall make sure that appropriate fasteners such as masonry
anchors, heavy duty wood screws or expansion bolts are used for heavy objects.
Note: Additional support hardware may be necessary (not included with unit) to secure the
unit properly to the wall. If the surface is not solid enough to hold the unit and
attached cabling, it is recommended that a small piece of 3/4” plywood be fastened
to the wall before attaching the unit. This will help ensure a more stable environment.