Filter
Top Products
Zhone Technologies / A-13
Alphabetical Reference Parameter reference
• ANLG: during a digital loopback, the incoming digital DS0 signal is sent back to the far
end without decoding it.
Configuration group: FXOCFG
Syntax:
(GET/SET) FXOCFG:LOOP:n:(OFF, DGTL, ANLG)
LOOP (FXS)
Loopback for the FXS port. Possible values are:
• OFF (default)
• DGTL: during an analog loopback, the decoded analog signal is sent back to the far end
after decoding and then re-encoding it.
• ANLG: during a digital loopback, the incoming digital DS0 signal is sent back to the far
end without decoding it.
Configuration group: FXSCFG
Syntax:
(GET/SET) FXSCFG:LOOP:n:(OFF, DGTL, ANLG)
LOOPBACK (V.35)
Loopback for the V.35 port. Possible values are:
• LINE:
• LOCAL:
• OFF (default):
Configuration group: DPCFG
Syntax:
(GET/SET) DPCFG:LOOPBACK:1:(LINE/LOCAL/OFF)
LOOPBACK (T1)
Loopback for the T1 line. Loopback tests terminate after 10 minutes. Possible values are:
• LINEOFF: deactivates a line loopback
• LINEON: activates a line loopback
• LOCALOFF: deactivates a line loopback
• LOCALON
: activates a local loopback
Configuration group: T1CFG
Syntax:
(GET/SET) T1CFG:LOOPBACK:X:(LINEOFF/LINEON/LOCALOFF/LOCALON)