Filter
Top Products
4-14 \ Zhone Technologies
Model No.
Running Head
Adding and deleting routes Configuring the Z-Plex
Table 4-1explains the interfaces in the route table.
Table 4-1. Route Display Values
4.9.4.1 Displaying host routes
To display information about all host routes, enter the ROUTE:HOSTALL:x command.
For example:
user> GET ROUTE:HOSTALL:1
>Host Destination 1: 192.168.21.32
>Host Gateway 1: 12.12.1.1
>Host Destination 2: 192.168.43.66
>Host Gateway 2: 122.54.1.1
>Host Destination 3: 192.111.87.4
>Host Gateway 3: 165.87.43.1
To display information about particular host routes, enter the ROUTE:HOST:x command.
For example, the following command displays information about host route 1:
Field Explanation
hd0 Time slot 24 management
cpm0 Ethernet management
fdl0 FDL management
lo0 Loopback interface (local)
user> GET ROUTE:SHOWINTF:1
ROUTE NET TABLE
destination gateway flags Refcnt Use Interface
-------------------------------------------------------
128.8.23.0 128.23.0.2 101 0 0 hd0
192.168.8.0 128.23.0.1 3 0 0 hd0
-------------------------------------------------------
ROUTE HOST TABLE
destination gateway flags Refcnt Use Interface
-------------------------------------------------------
127.0.0.1 127.0.0.1 5 1 0 lo0
-------------------------------------------------------