Filter
Top Products
A-12 \ Zhone Technologies
Model No.
Running Head
Parameter reference Alphabetical Reference
LINELEN
Specifies the CSU line build out or the DSX line length. For a CSU, possible values are:
• 00 (0dB)
• N75 (
-7.5dB)
• N15 (
-15.0dB)
• N22 (-22.0dB)
For a DSX, possible values are:
• D0 (0-132 feet)
• 133 (133-265 feet)
• 266 (266-398 feet)
• 399 (399-532 feet)
• 533 (533-654 feet)
• 655 (655-700 feet)
Configuration group: T1CFG
Syntax:
(GET/SET)
T1CFG:LINELEN:X:(00/N75/N15/N22/D0/133/266/399/533/655)
LOFC
LOFC (loss of frame count) indicates the total number of times a Loss Of Frame (LOF) is
declared. An LOF is declared after 2.5 seconds of a continuous Loss Of Synchronization
(LOS) or Out-Of-Frame (OOF) condition. The LOF is cleared after no more than 15
consecutive seconds without another LOS or OOF.
Configuration group: MCUR, PMTOT, PMINT, FARPMCUR,FARPMTOT, FARPMINT
Syntax:
GET (PMCUR, PMTOT, FARPMCUR, FARPMTOT):LOFC:x
Syntax: GET (PMINT, FARPMINT):LOFC:x:(0-95)
LOOP (FXO)
Loopback for the FXO port. Possible values are:
• OFF (default)
• DGTL: during an analog loopback, the decoded analog signal is sent back to the far end
after decoding and then re-encoding it.