Filter
Top Products
A-32 \ Zhone Technologies
Model No.
Running Head
Error messages Alphabetical Reference
Loopback type mismatch User tried to deactivate a line loopback while local loopback is
active.
NCHAN set to 0 please
configure the numbers of
channels
User tried to configure the starting channels (SCHAN) without
configuring number of channels (NCHAN).
Parameter not found Invalid parameter in GET or SET command.
Password must be
between 7 and 12
character
New password not between 7 and 12 characters.
Please configure IP
address for DS0
After activating a DS0 management channel, you must assign it an IP
address.
Please configure IP
address for FDL mgmt
After activating a IP over FDL management channel, you must
assign it an IP address.
Reserved IP address Tried to assign reserved IP address to an interface.
SLC96 on WAN2 is not
supported
Tried to specify SLC96 framing for the WAN 2 interface. SLC 96
framing is only supported on WAN 2.
Subsystem not found Parameter configuration group not found.
Syntax Error No argument to the GET or SET command.
Table Index is beyond the
limit 0-95
The requested performance interval and enter value is out of range.
TFTP download failed TFTP download error.
This is not a FXS/FXO
Port
Tried to configure an FXS or FXO port when not supported.
TS already taken Tried to assign an already assigned time slot to another use.
Table A-3. Error messages (Continued)
Message Explanation