Filter
Top Products
CODEC Configuration
Use the CODEC (COde/DECode) Configuration page to
support the Caller ID modes used by your PSTN service provider
on the line connected to the X6v's TELCO port.
The defaults shown in the illustration are for the United States. In
other regions, the appropriate defaults will appear.
Setting Description
Caller ID Type 1
Mode
Select the on-hook mode: None,
Belcore MDMF, Belcore SDMF, ETSI
WINK, ETSI RING, DTMF. The
default is Belcore MDMF.
Caller ID Type 2
Mode
Select the off-hook mode: None,
Belcore MDMF, Belcore SDMF, ETSI
WINK, ETSI RING, DTMF. The
default is Belcore MDMF.
Message Waiting
Mode
Select None, Belcore MDMF, Belcore
SDMF, ETSI. The default is Belcore
MDMF.
Save These Settings Click this button to save your settings to
flash memory.
57
Chapter 4: Setting Up VoIP Service